1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 238Get this manual
Fill the gearcase with OMC Hi- Vis gearcase lube until lubricant appears at the oil level holeInsert the oil level plug firstInstall the filldrain plug Tighten the oil level and the filldrain plugs to torque of 60-84 inIbs (7-9 Nm) Inspect the gearcase oil level after motor test has been performed 27Install water pump as described in Water Pump Servicing, this SectionInstallation 1On models with gearcase extension kit, make sure the driveshaft tube extension, water tube extension, and gearcase exhaust seals are in place 46 2Coat the drives haft splines with OMC Moly LubeDo not coat top surface of the driveshaft as lubricant here may prevent seating of the drives haft in the crankshaft3Pull up on the shift rod and engage REVERSE gearMove the shift lever on the motor to REVERSE position !3061
47 diameter of the OMC Triple-Guard grease to lowergearcase Lightly apply water tubeCarefully install the outside making sure the drives haft splines engage the crankshaft, the water tube enters the impeller housing grommet, and the upper shift rod enters the shift rod connector