1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 235Get this manual
7Using OMC Bearing Installer PI 319931 and an arbor press, install the driveshaft bearing into the bearing sleeve with the lettered side against the tool
8Using OMC Bearing Installer PI 319931, oil and install the bearing sleeve with the bearing into the gearcase with the lettered side of the bearing against the tool9Using OMC Seal Installer PI 326554, install two new driveshaft seals back to back as follows :
13211331
Apply GMC Gasket Sealing Compound to the metal casing of the seals before installing Install the inner seal Q) with lip of the seal facing toward the gearcaseInstall the outer seal with lip of the seal facing away from the gearcase Apply OMC Triple-Guard grease to the seal lips after installing 10Coat the shift rod O-ring with GMC Triple-Guard grease and install in shift rod bushing