1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 206Get this manual
Exhaust Housing Servicing10, 14 Removal and Disassembly 1Remove the powerhead as described in Section 42Remove the gearcase as described in Section 6
3 Remove the screws the exhaust housing
retaining the lower engine cover to from the upper and lower side
4Remove the four nuts mounts
5Remove the two screws and flat washers securing the port to the starboard lower mount housing
6Loosen the nut from the upper front rubber mountPry up on the upper side mounts and separate the exhaust housing from the swivel bracket assembly7Remove the upper and lower side mounts from the exhaust housing
8Remove the shift rod connector from the lower end of the