1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 201Get this manual
3Clean all sealant from the threads on the two upper mount bracket to steering bracket screwsSpray threads of screws with OMC Locquic PrimerApply OMC Nut Lock to threads of screwsPosition the swivel bracket assembly on the exhaust housingInstall the two upper mount bracket screws and mount link Tighten screws to torque of 96-120 in Ibs(11-14 Nm) INote Use extreme caution when installingorthe uppersealmount bracket screwsBe careful not to pinch tear the
4Place the lateral mounts in the lower mount bracketsApply OMC Gasket Sealing Compound to threads of lower mount bracket screwsInstall the lower mount bracketsTighten screws to torque of 60-84 inIbs(7-9 Nm)
!al 5Position new idle relief muffler gasketInstall the muffler to the exhaust housingTighten the screws to torque of 48-60 inIbs(5-7 Nm)6Position the lower engine cover on the exhaust housingLubricate the lower part of the upper shift rod with OMC Triple-Guard greaseInsert the shift rod through the lower engine coverInstall the shift rod to the bellcrank with pin, bow washer and new cotter pin