1989 Johnson Evinrude "CE" 9.9 thru 30 Service Manual, P/N 507754, Page 193Get this manual
f12l r:J31 5Install the handle end of the throttle cable through the trunnion
seal See reference figureSnap the throttle cable into recess in handleInstall the retainer clip
1 4 6Push the throttle cable pin through the end of the throttle cable f151 7Lubricate end of the pin, guides, rollers, helix grooves and inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and place the pin into slots of the inner handlePlace the rollers on ends of the roller pin8Assemble the helix halves on the handle and slide the grip over the helixBe sure the speed indicator is positioned with the speed range and not 180' outSnap the grip into place9 Install the twist gripMake sure the grip is correctly oriented and the detents snap into placeTurn the idle speed minimum slow speed position