1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 274Get this manual
f311 8Install the pinion bearings using the following components of OMC Universal Pinion Bearing Remover and Installer PIN 391257 and two tool spacers :
PN 326582 Rod PN 326583 Plate PIN 326577 RemoverInstaller
Y 4-20 inScrew -20 inScrew in Flat Washer PN 330067 Spacer, Short PN 330068 Spacer, Long
C03141 (MOD)
f31l f31l
Assemble the tools using short spacer PN 330067 to install the lower pinion bearingPress against the bearing's lettered side until washer contacts short spacer Assemble the tools using long spacer PN 330068 to install the upper pinion bearingPress against the bearinglettered side until washer contacts long spacer (8)To ensure accurate bearing location, washer flat and screw must be tight
sleeve using OMC Bearing Installer, PN 322923Press against the lettered side of the bearing until the tool is seated on the bearing sleeveUsing the same tool attached to OMC Plate P 318122, press the bearing sleeve assembly into the gearcase until the plate contacts the gearcasePress against the lettered side of the bearing when installing it into the gearcase