1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 266Get this manual
Fill the gearcase with OMC Hi- Vis gearcase lube until lubricant appears at the oil level holeInsert the oil level plug firstInstall the filldrain plugTighten the oil level and the filldrain plugs to torque of 60-84 inIbs(7-9 Nm) Inspect the gearcase oil level after motor test has been performed27Install water pump as described inWater Pump Servicing,this SectionInstallation 1On models with gearcase extension kit, make sure the driveshaft tube extension, water tube extension, and gearcase exhaust seals are in place3061
1461 coat topthe driveshaftthe driveshaftOMC lubricant here may 2Coat surface of splines with as Moly LubeDo not
prevent seating of the drives haft in the crankshaft3Pull up on the shift rod and engage REVERSE gearMove the shift lever on the motor to REVERSE position
1471 4Lightly of the OMC Triple-Guard grease to lowergearcase apply outside water tubeCarefully install the diameter