1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 262Get this manual
Assembly
1241 1Using OMC Bearing Installer PIN 319876, oil and install
the large bearing in the propeller shaft bearing housing Press against the lettered side of the bearing when installing
1251 2Using OMC Bearing Installer PIN 319875, oil and install
the small bearing in the propeller shaft bearing housing Press against the lettered side of the bearing when installing
2627 3Install two new seals back to back using OMC Seal Installer PIN 326553Apply OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing in toward the bearing housingInstall the
outer seal with lip faCing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installing
4 Apply OMC Triple-Guard grease to new bearing housing 0ringPlace the O-ring in the bearing housing groove
281 5To install the forward bearing cup into the gearcase,