1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 221Get this manual
C082141
C082132
Install the handle end of the throttle cable through the seal See reference figureSnap the throttle cable trunnion into recess in handleInstall the retainer clipf14l6Push the throttle cable pin through the end of the throttle f15l7Lubricate end of the pin, guides, rollers, helix grooves and inner handle guide slot with OMC Moly LubePlace the guides over the roller pin and place the pin into slots of the inner handlePlace the rollers on ends of the roller pin8Assemble the helix halves on the handle and slide the grip over the helixBe sure the speed indicator is positioned with the speed range and not 180 outSnap the grip into placef121 r:J3l5