1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 198Get this manual
Assembly 1Note Proceed slowlyMake no forced assemblies unless a
pressing operation is called forAll internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard LubricantIf removed, place two long water deflectors and one short water deflector in the cylinder blockBe sure water deflector pin is installed in lower starboard deflectorDetermine which part of the piston faces up by holding the piston next to the cylinder blockWhen installed, sharp edge of the piston deflector will face the intake ports
148114913Using OMC Wrist Wrist Pin Retaining Ring Driver Pin Retaining Ring PIN 318599 and OMC Cone