1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 142Get this manual

1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 142

I DR1736 -'
o.hmmeter tests must be performed with engine NOT running
Stop Switch TestRand TE Models
1Note All

1381 The steering
handles on these models contain combination stop switchemergency ignition cutoff device When the clip and lanyard are removed, the emergency ignition cutoff device is in the STOP position When the clip and lanyard are installed, the emergency ignition cutoff device is in the RUN position To STOP the engine when the clip and lanyard are in place, press inward on the assembly until the engine stops7915

1381 Install the clip and lanyard 13AI Separate the five -pin Amphenol connector 13AI 4Calibrate an ohmmeter on high ohms scale and connect

Back to 1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660