1988 Johnson Evinrude "CC" 9.9 thru 30 Service Manual, P/N 507660, Page 134Get this manual
Conn ector Terminal Installation 1Apply isopropyl alcohol to the plug and receptacle Align flat areas and carefully install the plug into the receptacle 2Apply isopropyl alcohol to the terminal cavity ill
To avoid personal injury, securely hold insert tool against shoulder of terminal while installing terminals into cavity3 Position the OMC Insert Tool PI 322697 the shoulder of the terminal
f12l1-f3l
against
i-f41 Support the plug or receptacle against flat surface and push on the terminal until shoulder on the insert tool is at the end of the plug or receptacleConnector Assembly Apply isopropyl alcohol to the plug and receptacle Align flat areas and carefully install the pi ug into the receptacle Secure the connector with the wire retainer 14162