1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 332Get this manual
the band over the cylinderOil and install the O-ring on the band nutInstall the band nut into the cylinderInstall the band nut loosely 134116With the tilt cylinder secured in soft-jaw vise, slide
13517Slide the piston and rod assembly into the cylinder but
do not engage the threads of the capSet the assembly aside at this time
13618Remove the three oil reservoir retaining screws with
washersRemove the oil reservoir from the manifoldCOA2446
13719Clean and inspect the oil reservoir, retaining screws,
washers and O-ring Replace any components, if necessary
20Remove the three screwsmanifold plate reservoir filter 1)