1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 324Get this manual
1 Relay Ohmmeter Tests
electrical troubleshooting results
INotel Throughout this section two symbols are used to interpret
Use continuity light or ohmmeter calibrated on low ohms scale to test continuity
IT] This symbol indicates continuity or very low resistance This symbol indicates no continuity or very high resistance (00)
INotel To avoid damaging components or troubleshooting
equipment, disconnect the battery cables and remove the relays before proceeding
1Use continuity light or ohmmeter calibrated on low ohms scale to test continuity
2 Connect meter leads to relay terminals 87a and 30 The meter must show continuity3Connect meter leads to relay terminals 87 and 30 The meter must show no continuity4Calibrate an ohmmeter on low ohms scale and connect the leads to relay terminals 85 and 86 The meter must show 70 15 ohms