1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 275Get this manual
Electric Starter Servicing, All Models Removal
INote Disconnect the battery cables at the battery1Disconnect the starter motor lead at the motor2Remove the carburetor air silencer assembly for improved access
3Remove the three screws starter to the powerhead
and lockwashers retaining the,
Disassembly 1Observe alignment marks on commutator end cap and drive end cap for correct reassemblyRemove two thru-bolts from starter motor
2Tap the commutator end cap and carefully remove it to prevent the loss of four springs under the two ground brushes and insulated brushes3Tap the drive end cap to loosen it and pull armature You will find that the permanent magnets in the frame will resist removal of the armature