1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 246Get this manual
Assembly INotel Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection, Page 6-4 14811Assemble the following components of OMC Pinion Bearing Remover and Installer PIN 391257 as shown
-20 Y2 inHex Head Screw PIN 326584 Spacer in0.0Flat Washer
PIN 326582 Rod PIN 326576 Installer -20 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing on the tool3Insert the tool with the bearing into the gearcasePress the bearing in the gearcase until the washer on the tool contacts the spacer
1491 Remove the toolPosition new O-ring CD on the pinion
bearing screwApply OMC Nut Lock to threads of the screw and the O-ringInstall the screw into the gearcaseTighten the screw to torque of 48-80 inIbs(5,5-9,0 Nm)5To install the water intake screen, drop it into the water intake cavity and push it down as far as it will go with screwdriver or other suitable tool