1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 243Get this manual
D_R2_o_6 '
D_R_2o 6-12 _
13411351 5Oil, then install new bearings in the bearing housing
For the large forward bearing, use OMC Bearing Installer PI 320669 To install the smaller rear bearing, use OMC Bearing Installer PI 320738 Press against the lettered side of the bearings to prevent damage to the bearings when installing
13611371 6Install usingseals back toInstaller, the rear of the bearing new back in housing OMC Seal PIN 910585Apply
OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the bearing housing and install the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installingCOA3525
1381 7Lightly apply OMC Triple-Guard grease to new bearing