1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 242Get this manual
Propeller Shaft Bearing Housing Servicing Inspect bearings in placeIf bearing is removed for any reason it must be replacedrJ1l1To remove the two seals, use either OMC Bearing and Seal Remover PIN 391259 or OMC Narrow Two-Jaw Puller PI 391010 attached to OMC Slide Hammer PIN 3910081322To remove the front bearing, attach OMC Wide Two-Jaw Puller PIN 391012 to OMC Slide Hammer PIN 391008133 3To remove the rear bearing, attach OMC Narrow Two-Jaw Puller PIN 391010to OMC Slide Hammer PIN 3910084Thoroughly clean the bearing housing and the three bearing housing retaining screws in solventDiscard the retaining screws' O-rings,