1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 241Get this manual
8_13_3_05
Oil, then install the new cone and roller assembly on the forward gearBe sure to press against the cone, not the bearing cageA Va insocket is about right for this applicationPress until inner race is seated on the gear
16Remove the pinion bearing from the gearcase as follows:
Remove the bearing retaining screw from the gearcaseRemove and discard the a-ring from the screw In the gearcase, assemble the following components of OMC Pinion Bearing Remover and Installer PIN 391257:
PIN 326581 Remover
PIN 391260 Plate CD PIN 326582 Rod
Q) PIN 326586 Flange Nut