1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 231Get this manual
COA3590
1501 9Align hole in the clutch dog with slot in the propeller shaft
Install the clutch dog on the shaft with grooved end of the clutch dog facing toward forward end of the shaft10Insert the shifter shaft into the propeller shaft, aligning holes in the shifter shaft, propeller shaft and clutch dogWhen holes are aligned, insert the clutch dog pin into the clutch dog and shifter shaftSecure pin with new retainer springInspect the spring for overlapping or loose coils11Push the shifter detent down into the REVERSE position
152112Locate the propeller shaft assembly and align the forward
bearing housing with the shift detent CD toward the top Be sure the thrust bearing and thrust washer are properly positionedInsert the propeller shaft assembly into the gearcase, being sure to align the shift housing pin with hole in forward end of gearcase housing