1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 230Get this manual
Assembly INotel Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection, Page 6-4After the gearcase has been thoroughly cleaned and inspected, install new pinion bearing in the gearcase as follows:
14311 Assemble
the following components of OMC Pinion Bearing Remover and Installer PIN 391257 as shownScrew
-20 Y2 inHex Head PIN 326584 Spacer in0.0Flat Washer
PIN 326582 Rod PIN 326575 Installer -20 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse OMC Needle Bearing Assembly Grease to hold the bearing on the toolCOA3082