1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 219Get this manual
Disassembly Assembly f311 Start by removing all the parts from the housing, inspect the housing for cracks or melting, and install new top plate The top plate locks in place in the housing with square index tab2The liner now slides in and mates with the plate at the point where the liner is split Isl
3Lightly coat the liner with oilWith counterclockwise
t=J rotation install the impeller into the liner with slot for impeller
Run thin bead of OMC Adhesive MTM in the seal groove and install the special-shaped O-ring seal
cam facing out
5Install the water tube grommet with the inside chamfered edge facing upSeat the grommet in the impeller housing Secure the water tube bracket to the impeller housing6Apply thin bead of OMC Adhesive to groove of the impeller housing grommetPlace the grommet in position on the impeller housingInstallation 1Apply OMC Adhesive to the impeller plate area of the gearcase