1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 206Get this manual
6 Lubricate and place the bushings in the swivel bracket 1221 Place the swivel bracket in the stern bracketsLubricate
and place the thrust washers between the stern brackets and swivel bracket
8Remote Electric ModelInsert the tilt tube through the stern and swivel bracketsTighten the tilt tube nuts to torque of 24-26 ftIbs(32-35 m)Then, back off nuts one-eighth to one-quarter turn after applying torque
the tilt boltInsert the tilt bolt through the starboard stern bracket and thrust washer into the swivel bracket centerInstall the steer ing friction handle guard on the tilt bolt with the lip upPush the tilt bolt through the port side of the swivel bracket, thrust washer, and stern bracketInstall the other washer and the nutTorque the nut to 14-16 ftIbs(19-22 Nm)
p Manual Tilt ModelsPlace one tilt bolt washer on
1231 10Install the shock absorber upper pin through the swivel