1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 59Get this manual
Synchronization and Linkage Adjustments Remote Control Models INotel linkage procedures are controlled by engrne carburetor size and throttle cam styleBefore proceedingcheck your engine and use these drawings to choose MethodA" or Method "B
[iJ If your engine is equipped with 1316 inventuri carburetors and
a double mark throttle cam PIN 394466, proceed with Method "A" on this pageIf your engine is equipped with inventuri carburetors and single mark throttle cam PIN 431707, proceed with Method "8" on page 1-38
Method A"
INotellt is important that this step-by-step procedure be followed in sequence and be performed exactly as written to ensure engine idling and smooth operation throughout the RPM range INotel The flywheel has two timing gridsBe sure the flywhe.el grid that is not marked "Rope" is used for remote control model adjustmentsINotel Remove both remote control cables from the engine before performing the following adjustmentsSet Timing Pointer INotellf the timing pointer or intake manifold has been disturbed, check the top dead center timing pointer alignment