1988 Johnson Evinrude CC 60 thru 75 outboards Service Manual, Page 44Get this manual
New Engine Preparation The careful preparation of new engine will ensure owner satisfaction1Inspect carton: If damaged, contact carrier2Inspect engine: If shipping damage is found, contact carrier Check for loose parts or connections3Check gearcase lubricant levelFill to oil level hole4Install test wheel and put engine into test tank
ill fuel primer systemCheck for leaks!
5Pressure test fuel system by momentarily activating the
6Start engine and check cooling system operation
& 7Check shift operationi sources"'" 8Check electrical and ignition systems for stray spark 9Check all adjustmentsSee Synchronization and Linkage Adjustments, this section1OCheck idle RPM while engine is running in FORWARD gearThe boat must be in the water, under normal operating conditions, with the correct propeller installedThe boat's movement must be unrestrainedThe boat must not be tied to dock or trailer11Check full-throttle test wheel RPMSee Engine Specifications, this section12Correct any problems found13Clean entire engine14Complete paperwork: Registration Dealer's customer record Owner's temporary identification card 15Review the GMC 1+2' Extended Protection Plan with owner