1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 293Get this manual
1431 7guide
Push core wire Q) (from engine end) through wire clamp
Q) until wire is flush '32 in(0,8 mm) with end of casing
r;-;] Turn set screw in on large end of wire clamp until it
touches core wire, then tighten exactly one more turn This kinks and locates core wire Grease trunnion pocket of controlLift throttle cable and rotate cable forward until trunnion cap can be inserted into trunnion pocket of control1