1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 292Get this manual
COB5629
OMC Long LifeCablesInstallation
OMC Cable Adapter Kit, PI 173600, must be used to install OMC Long Life cables into the remote control1Remove three cover screws from remote control and pull two halves apart
1361 1371 138
2Place housing half and cover half on flat surfaceApply OMC Triple -Guard grease to all points shown in figuresBe sure to grease the three cover screw threaded holes3Lubricate outside of brass sleeves at control end of both remote control cables with OMC Triple-Guard greasePlace trunnion caps over cable trunnion and slide casing guides over cable sleeves5Using in hex wrench, start the set screws into each end of both control end wire clamps
COB5630