1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 248Get this manual
r:t7l 8Bend the inside loop of the rewind spring in toward L!!J the center of the starter housing Engage the slot of the pulley with the inner loop of the rewind spring and install the pulley in the starter housing f1811191 9 Place the friction plate spring washer and the friction plate on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lockring
119110Be sure the starter pawl bushing is installed in the pulleyApply OMC Triple -Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlPlace the starter pawl in the pulley119111housmgthe starter housing spring in the starter
COA1376
120112Install the starter pawl plate return spring