1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 235Get this manual
Assembly Note Before beginning assembly procedures, all gearcase components must be thoroughly cleaned and in serviceable conditionRefer to Cleaning and Inspection, Page 6-5 1421Assemble the following components of OMC Pinion Bearing Remover and Installer, PIN 391257, as shown:
-20 inHex Head Screw PIN 326584 Spacer in0.0Flat Washer
PIN 326582 Rod PIN 326575 Installer -20 inHex Head Screw PIN 391260 Plate
2Place the bearing on the installer tool with the lettered side of the bearing facing the toolUse GMC Needle Bearing Assembly Grease to hold the bearing onto the tooL 3Insert the tool with the bearing into the gearcaseDrive the bearing into the gearcase until the washer on the tool contacts the spacer
Remove the toolPosition new O-ring CD on the pinion bearing screwApply GMC Nut Lock to threads of the screwInstall the screw into the gearcaseTighten the screw to torque of 48-80 inIbs(5,5-9,0 Nm)
5To install the water intake screen, drop it into the water intake cavity, and push it down as far as it will go with screwdriver or other suitable tool