1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 216Get this manual
1321 _ 1 3
Oil and install new bearings in the bearing housingFor the large forward bearing, use OMC Bearing Installer PI 320669 To install the small rear bearing, use OMC Bearing Installer PI 320738 Press against the lettered side of the bearings to prevent damage to the bearings when installing
132113316Install new seals back toInstaller the rear of the bearing back in PIN 910585Apply housing using OMC Seal
OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with lip facing toward the bearing housing and install the outer seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installing COA3525
Lightly apply GMC Triple -Guard grease to new bearing housing O-ringInstall the O-ring in groove of the housingInstall new O-rings on the retaining screwsDriveshaft Seal Housing Servicing