1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 215Get this manual
Propeller Shaft Bearing Housing Servicing Inspect the bearings in place If bearing is removed for any reason, it must be replaced 12711To remove the two seals,
use either OMC Bearing and Seal Remover PI 391259 or OMC Narrow Two-Jaw Puller PI 391010 attached to OMC Slide Hammer PI 391008 Puller PIN 391012 to OMC Slide Hammer PI 391008
1281 2To remove the front bearing, attach OMC Wide Two-Jaw