1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 115Get this manual

1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual, Page 115

Installation
INote Do not use sealer on carburetor gaskets&
Replace any fuel hoses if deteriorated or damaged
1Install new carburetor flange gaskets2Install primer hoses to carburetor nipples3Install carburetors on manifold studs and secure with lockwashers and nuts4Install fuel hoses on carburetors and secure using new clamp and OMC Tie Strap Installation Tool PIN 3237185Snap throttle linkage into placeTo adjust linkage, refer to Section 1; Synchronization and Linkage Adjustments, before installing air silencer

6models mounts:

Back to 1988 Johnson/Evinrude "CC" 40 thru 55 Models Service Manual