1988 "CC" Colt / Junior thru 8 Models Service Manual, P/N 507659, Page 273Get this manual
Cleaning and Inspection 1Wash metal components in solvent and dry with compressed air Inspect spring for worn or broken end loops3Examine pawl for wear 4Inspect friction spring, spindle, and retaining ring5 Inspect rope and discard if frayed Replace with rope cut to length of 59 in(151 cm)6 Examine pulley and housing for sharp edges and rough surfaces that could fray rope File and polish to removeAssemblyColt, Junior thru 4BR 1Lubricate spring and spring cavity with OMC Triple-Guard grease or Lubriplate 7772 Lubricate outside diameter of spindle with OMC Triple -Guard grease or Lubriplate 777 and install through pulley
COAl 17 1
3Place spring in slot of pulley as shownPosition pulley with spring on housing with spring going through gate of spring cavityEngage rib in center of housing with slot in spindle