1988 "CC" Colt / Junior thru 8 Models Service Manual, P/N 507659, Page 264Get this manual
20While holding the reverse gear in position, fill the forward gear detent notches with OMC Needle Bearing Assembly Grease and install the detent balls21 Hold the reverse gear in position and install the propeller shaft assembly into the gearcaseThe detent balls must be positioned 90 away from the driving lugs of the forward gear
22 Rotate the propeller shaft to ensure the reverse gear is fully engaged with the pinion23Apply OMC Gasket Sealing Compound to the threads of the retaining screws and around a-ring flange of the gearcase head Apply OMC Triple-Guard grease to new gearcase head -ring Install the -ring Apply OMC Triple-Guard grease to the seal lipsInstall the gearcase head and tighten the screws to torque of 60-84 in Ibs(7-9 Nm) -
1391 24Apply OMC Triple-Guard grease to the driveshaft seal lipsInstall the driveshaft and rotate to engage pinion splines