1988 "CC" Colt / Junior thru 8 Models Service Manual, P/N 507659, Page 263Get this manual
12Position the two thrust washers and thrust bearing on the pinionPlace thrust washer with inside chamfered edge against pinion Then place thrust bearing on pinion Position thrust washer with chamfered outside edge on the pinion with the chamfered edge away from pinionthe gearcase in the position shown and install
13211 Place pinion
r::;:;] 14Install the forward gear by positioning it in the gearcase
Insert the propeller shaft into the forward gearPull up sharply on the shaft and you will feel the forward gear snap into positionRemove the propeller shaft
1341 15Position the reverse gear and thrust washer on the propeller shaft
INotel The outside chamfered edge of thrust washer goes toward