1988 "CC" Colt / Junior thru 8 Models Service Manual, P/N 507659, Page 194Get this manual
Assembly Proceed slowlyMake no forced assemblies unless pressing operation is called forAll internal components must be perfectly clean and lightly coated with Johnson or Evinrude Outboard Lubricant INote Use
new gaskets, oil retainers, and O-rings during assemblyis in place8420 55
1 Note Make sure water deflector 1911
1Apply coat of oil to wrist pin and wrist pin hole in piston
Insert wrist pin through "L" side of piston Oil wrist pin bearing in connecting rod and place in positionInstall wrist pin using OMC Wrist Pin Pressing Pin PI 326624 and OMC Piston Cradle PIN 326572
INote Pressing pin must enter "L" (loose) side of piston
12113Install pistonenoughon pistonitSpread each ring with piston rings ring expander just to slip over the head of the