1988 "CC" Colt / Junior thru 8 Models Service Manual, P/N 507659, Page 192Get this manual
Disassembly.5 thru Deluxe
To simplify reassembly and wiring installation, layout the various screws and clamps in the order of their proper location 1Remove carburetor, leaf valve assembly and intake manifoldDiscard gaskets2Remove the cylinder head and gasketDiscard the gasket
3With pointed scribe, mark the top piston dome, "No1," and the bottom piston dome, "No.2
4 Remove exhaust coverDiscard gasket5Remove the lower crankcase head
101 6Remove snap ring from crankcase r:J1l
7Using tool as drawn on page -8, or equivalent, push the crankcase taper pin toward intake manifold surfaceDo not use any tool smaller than taper pin bore to remove the pin
8Remove the crankcase to cylinder block screws NoteLoosely install the cylinder head to prevent the pistons from