1988 "CC" Colt / Junior thru 8 Models Service Manual, P/N 507659, Page 94Get this manual
Replacement 1Remove and discard tie straps from fuel pump hosesModels using hose clamps use OMC Hose Clamp Wrench PI 325043 to release clamps Remove the hoses from the fuel pump, observing hose locations for reassembly2 Remove the fuel pump mounting screws If equipped with gasketdiscard the gasket3 Connect the hoses to the fuel pump Be sure the hoses are fully engaged on the fuel pump nipples Secure the fuel hose with new tie straps using OMC Tie Strap Installation Tool PI 323716 Remove all old adhesive from fuel pump mounting screws Apply OMC Locquic Primer and OMC Nut Lock to the threads of the screws If gasket is required between the fuel pump and the crankcase, install the gasketTighten the mounting screws to torque of 24-36 in Ibs(2,8-4,4 Nm)5 If removed, install the cover with lip of screen facing the fuel pump Tighten the outer screw to torque of 10- 15 inIbs(1,1 1,7 Nm)Be sure the hose is fully engaged on the fuel cover nipple and secure the hose with new tie strap