1987 Johnson/Evinrude CU Outboards 35A thru 55 Service Manual, Page 244Get this manual
'17l 8Bend the inside loop of the rewind spring in toward LJ the center of the starter housingEngage the slot of the pulley with the inner loop of the rewind spring and install the pulley -n the starter housingi r:r8l1-f9l
9Place the friction plate spring washer and the friction plate on the pulley hubSecure the friction plate and friction plate spring washer with the pulley lockring
f191 10Be sure the starter pawl bushing is installed in the pulleyApply OMC Triple-Guard grease or Lubriplate 777 to boss of the starter pawlPlace spring washer on the boss of the starter pawlplace the starter pawl in the pulley119l 11housingthe starter housing spring in the starter
1201 12Install the starter pawl plate return spring on the starter