1987 Johnson/Evinrude CU Outboards 35A thru 55 Service Manual, Page 190Get this manual
r:J1l 3 Install the metal outer handle over the plastic inner handle and drive the outer handle into placeSecure tab of the inner handle into recess of the outer handle with the steel pin
the seal See reference figureSnap the throttle cable trunnion into recess in handleInstall the retainer clip
113111415Install the handle end of the throttle cable through
distance of 112 in(12,7 mm)
1151 6Extend the stop switch from the inner steering handle a
7Wrap the stop switch leads and throttle cable with the spiral wrap sleeve (if equipped)
INote There must be 12 in(12,7 mm) clearance between the