1985 OMC 65, 100 and 155 HP Models Commercial Service Manual, PN 507450-D, Page 417Get this manual
15Place the fiber washers on the armature shaftI nstall the armature in the housing and into the end cap with the brushes
16Place new seals on the thru -boltsI nstall the thru-bolts and tighten the thru-bolts to torque of 2,5 Nm (20 inIbs17 Apply OMC Black Neoprene Dip to the heads of the thrubolts, to both end caps, and to housing seams 18Operate the motor in both directions to seat the brushesC03680
Trim Motor Repair ProcedureBosch 100 and 155
11501 11511 1521