1985 OMC 65, 100 and 155 HP Models Commercial Service Manual, PN 507450-D, Page 406Get this manual
0 COA2446 COA2448
C0A2450
16With the tilt cylinder secured in the soft jaws of vise, slide the band over the cylinderOil and install the O-ring on the band nutInstall the band nut into the cylinderTighten the nut securely17Slide the piston and rod assembly into the cylinder but do not engage the threads of the capSet the assembly aside at this time18Remove the three oil reservoir retaining screws with washersRemove the oil reservoir from the manifold19Clean and inspect the oil reservoir, retain ing screws, washers and O-ringReplace any components if necessary20Remove the three screws reservoir filter Q)
manifold