1985 OMC 65, 100 and 155 HP Models Commercial Service Manual, PN 507450-D, Page 327Get this manual

1985 OMC 65, 100 and 155 HP Models Commercial Service Manual, PN 507450-D, Page 327

3Remove the shoulder screw assembly to the housing retaining the starter lockout

4Remove the nut

the starter pawl retaining screw
5Remove the starter pawl retaining screwwasherstarter pawl plate with plate return spring from the starter assembly6Remove the starter housing spring and the starter pawl

with spring washer CD from the starter assembly
COA 1367

7Using screwdriver, pry open the pulley lockring Q) and remove ring from the starter
8Remove the friction plate

friction

plate spring

9Hold the pulley in the starter housing while turning the

Back to 1985 OMC 65, 100 and 155 HP Models Commercial Service Manual, PN 507450-D