1980 Johnson 2HP Service Manual, Page 14Get this manual
BREAK-IN
The 50:1 mixture is used during break-inother BIA certifi ed TC-W lubricantsUs only 50 Lubricant
OPERATION (FIRST Do not operate engine at continuous fuH power for the first hour of operationAfter 15 minutes of slow to half throttle operation, we recommend short burst of fuH throttle operation every to 10 minutesRun at full throttle for about 90 seconds, then return to half throttle lessNOTE Frequently check operation of cooling system during break-infine spray of wate discharged from exhaust relief outlet indicates operationAt intervals during the second hour, OPERATION (SECOND ply fuH power for periods of two minutes, reduce power to threequarter throttle for cooling periodAvoid continuous fuH throttle operation for extended periods during the next three hours
HELI-COIL INSERTS
INST ALLATION INSTRUCTIONS Drill to adequate depth using drill size listed Use to make certain Screw contoursupplied with packsiz is usedinsert Ch eck thread size shank