1979 Evinrude 4 HP Outboards Service Manual, PN 5424, Page 33Get this manual
CONNECTOR PLUGS Two waterproof connectors, male and female plug-in type, are utilized in the ignition systemA four wire connector connects the charge coil and sensor coil leads to the power packThe three wire connector connects the power pack leads to the ignition coilsSee Figure 4-7 Each connector is secured by retainerThe retainer must be removed to unplug the connector,
1Insert tool (OMC Part No322697) 2Pin remover (OMC Part No322698) 3Socket remover (OMC Part No322699) 4Pin terminal 5Socket terminal 6Crimp terminal here Figure 4-8Tools for Connector Terminals
14 wire connector 2.3 wire connector 3Clamps
Figure 4-7Connector Plug Location
dInsert the removal tool onto the terminaland push the terminal from the connectorSee Figure 4-9
CONNECTOR TERMINAL REMOVAL
12;111:1;111 NOTE