1978 Johnson 175, 200, 235 HP Outboard Service Manual, Page 123Get this manual
PROPELLER SHAFT BEARING HOUSING Oil retainers and bearings can be removed if wornTo remove rear bearing and seal use drive handle (Special Tool #311880) and bearing remover (Special Tool #316615)See Figure 6-66To remove front bearing use puller (Special Tool #380658) and jaws (Special Tool #380657)See Figure 6-67 OIL PUMP aRemove screws and lockwashers, and lift cover from pump housingSee Figures 6-47 and 6-68Oil pump, cover, and gears are serviced as an assembly