1978 Johnson 175, 200, 235 HP Outboard Service Manual, Page 34Get this manual
U NOTE iiiiifffil If choke solenoid was removed, re-install as
shown in Figure 3-33Slot in plunger must face starboard with link loops facing up
1Throttle cam
2Cam follower adjustment screw 3Cam follower roller 4Bottom mark 5Idle speed adjustment screw
Figure 3-34Throttle Cam Adjustment
1Center carburetor choke shaft
234567891011and lever assembly Solenoid link Ground lead Attaching screws (2) Solenoid assembly Spring Plunger Clamp Link retainer Slot in plunger Press here with pointed tool while adjusting solenoid