1977 Evinrude 4HP Outboards Service Manual, PN 5303, Page 40Get this manual
1Fuel pump mounting screws 2Clamp 73026
Figure 4-30Fuel Pump Removed
1Retainer plate 2Support plate
3Arm ature plate link 4Armature plate bearing
Figure 4-32Armature Support and Retainer Plates
bApply OMC Sea- LubeMoly Lube to the crankcase boss (pilot for armature plate)See Figure 4-33cLubricate the armature plate bearing with light coat of OMC outboard lubri cantdBe sure the throttle cam is behind the cam follower to prevent jamming the throttle evereIns ert needle nose pliers into the slots provided and hold the armature plate bearing compressed while guiding the armature plate into positionSee Figure 4-33fPosition th armature plate with the center of the charge coil in line with the stop on the retainer plate and tighten the screws to the torque specified in Section 2See Figure 4-31