1976 Evinrude 40HP outboards Service Manual, Page 40Get this manual
Be sure that the single upset mark on the side of the key is facing downSee Figure 4-31
VERTICAL
Figure 4-33Installing Armature Plate Over Delrin Ring Figure 4-31Flywheel Key Position bApply OMC Sea- LubeMoly Lube around crankcase boss (armature plate pilot)See Figure 4-34Oil Delrin ring with OMC outboard lubricantInstall ring over edge of retainer platePosition support plate on crankcasePlace retainer plate over support plate aligning holes with crankcaseAttach plateSee Figure 4-32Torque screws to specifications given in Section 2Carefully install arma-' ture plate over crankshaft to avoid damaging breaker armsUsing needle nose pliers in slots in Delrin ring, compress ring and locate armature plate over Delrin ringSee Figure 4-33Align holes in armature plate and support plateInstall with five screws and torque to specifications given in Section 2Reconnect all leads, Packard connectors, and linkages