1976 Evinrude 40HP outboards Service Manual, Page 39Get this manual
REASSEMBLY OF ARMATURE PLATE Reassemble 'components which were removedfrom the armature -plate, followIng the reverse order of disassemblySee Figur.e,s 4-1, 4-3 and 4-27Pay particl).lar attention to- the following: aCorrect locating of the driver coil and lamination assembly is governed by machined mounting surfaces on the armature plateCoil lamination heels should be flush with machined surfacesSee Figure 4-28
S HIFTER LOCK STO P
Figure 4-29Coil Locating Ring bReconnect all leads on the armature plate, making sure that connections are clear and tightBend condenser leads down so they cannot rub against flywheelcMake sure that new oiler wick is installed under the dirve coilSee Figure 4-30THROTTLE CAM